This special 24 mm flare nut type wrench will slide back into the recessed area of the cylinder head where the fuel line retainer screws into the head. 

This unique tool allows the technician to hold the water pump pulley securely while removing the viscous fan clutch on BMW V-8 and Sprinter Vans. 

This tool easily removes heater hoses with 3/4" or 5/8" quick disconnect couplings. 

This tool has been upgraded with spring loaded "silver" legs that allow the technician to set leg position prior to installing on the harmonic damper pulley to aid in the removal of the harmonic damper pulleys found on many Chrysler, and G.M. engines. 

This specialty Puller/Installer is designed to facilitate easy removal and installation of the crankshaft pulley on all 1981-1994 2.2 liter engines and 1986-1994 2.5 liter engines. In operation, the universal hole pattern allows for adaptation to early fo 

This unique tool has been developed to aid in the removal and installation of the crank bolt on most Chrysler engines. 

Five pin domestic gas engines for Chrysler & GM LATE MODEL GAS ENGINES with “Pressed on” water pump pulleys. 

This specialty wrench was designed for Dodge and Mitsubishi 4x4 trucks with the KM145 transmission. This includes the 1984 and later Dodge Ram D-50 pick-up, Dodge Raider, Mitsubishi Montero, and Mitsubishi MAX pick-up. 

This tool was designed to reach down through the engine compartment in areas that are not easily accessible with standard tools or “universal” belt tensioner tools. 

This 3 pin fan clutch wrench has been developed to work on the 2009 and later 5.7 liter Hemi Truck engine. With it’s long reinforced pins it firmly engages the hard to reach holes on the conical shaped water pump pulley. Used with 95210, removing the fa 

The #62020 fan clutch wrench two piece kit with rack and quick reference guide gives the professional technician the ability to service all fan clutches that have bolt on pulleys on the water pumps. 

Two wrenches are needed to perform removal and replacement of the viscous fan clutch. One wrench to hold the water pump stationary (depending on the application a 99800A, 61600, 61500B, 10800 or 10900 ) and the other wrench a 95210 to remove and replace  

The #62050 fan clutch wrench five piece kit with rack and quick reference guide gives the professional technician the ability to service all fan clutches that have "bolt on" and "pressed on" pulleys on the water pump. Works with Chrysler, GM, Ford, Land 

This fan clutch wrench two piece kit gives the professional technician the ability to service all fan clutches that have bolt on pulleys on the water pump. Works with Chrysler, GM, Ford, Land Rover and Mazda (Not including the 4.9 lit 

This three piece set gives the professional technician the ability to service all fan clutches that have bolted on water pump pulleys. 

This tool was designed to reach down through the engine compartment in areas that are not easily accessible with standard tools or “universal” belt tensioner tools. 

This unique tool has been developed to aid in the removal of the harmonic damper pulleys found on many Chrysler, GM engines. 

Manual Bushing R&R Tool allows the technician to service a wide range of bushings without removing components from the vehicle. 

A special tool is needed to depress the valve spring for removal of the hydraulic valve lifters. 

This tool allows for the easy adjustment of the camshaft spur belts having idler pulleys with pin holes.