FAN CLUTCH WRENCH COMBINATIONS

click on application above

Quick Reference Guide

back to new tools

CHRYSLER · FORD · GM · LAND ROVER · MAZDA

#61600 Universal + #95210 36 mm / 48 mm

Used with all water pump pulleys that are bolted on which inlcudes all Chrysler, Ford, GM, Land Rover and Mazda,except Ford 4.9 L 6 cylinder engines click here.

BACK TO TOP

FORD 4.9 Liter 6 Cylinder

#61600 Universal + #95260 40 mm "Thin"

Used on Ford 4.9 L 6 cylinder F Series pickup trucks 93-96 and Econoline van 92-96.

BACK TO TOP

LATE MODEL CHRYSLER & GM GAS ENGINES

#99800 Five pin + #95210 36 mm / 48 mm

Used on the new style water pump pulleys that are pressed on , the #99800 is used on the following applications: 1999 and later G.M. trucks, vans, SUV's, 1998 and later Jeeps also many 1998 and later Dodge trucks, vans and SUV's.

BACK TO TOP

LATE MODEL GM DIESEL ENGINES

#61500 Four pin + #95210 36 mm / 48 mm

Used on the new style water pump pulleys that are pressed on , the #61500 is used on the following applications: G.M. 6.5 Liter diesel engine starting in 2000, G.M. / Isuzu-Duramax 6.6 Liter diesel engine starting in 2001.

BACK TO TOP

AUDI & BMW

#61600 Universal + #62100 32 mm

Used on all:

AUDI 1996 and later except A6 1996-2001 2.8L (see below)

BMW 3, 5, 6, 7, 8, X & Z series

(The #61600 Universal Water Pump Pulley Holding tool works on all BMW's except the 4.0L & 4.4L V-8 engines).

OR

AUDI & VW

#61600 Universal + #63600 Four pin

AUDI A6 1996-2001 2.8L

VW Passat 1998 and later 3.0L

BACK TO TOP

SPECIAL HEAVY DUTY 36 mm & 48 mm

#61800 Used when extra leverage is needed in 48 mm applications.

#88550 Used when extra leverage is needed in 36 mm applications.

BACK TO TOP

"BOLTED ON" or "PRESSED ON"

To perform a viscous fan clutch removal two wrenches are needed. One wrench to remove the fan clutch and the other to hold the water pump pulley stationary.

Two different styles of holding wrenches are needed when holding water pumps. One type is for water pumps that have the pulley bolted on and the other is for newer style water pumps where the pulley is pressed on.

For bolt on style pulleys, the #61600 Universal Water Pump Pulley Holding Tool is used. This tool was designed to hold many different configurations of bolt sizes, bolt patterns and number of bolts holding the pulley to the water pump.

Newer style water pumps on Chrysler and GM applications are pressed on. There are no bolts to hold the water pump stationary when removing the viscous fan clutch as in the bolt on style. The pressed on pulleys have small holes in their face that a "pin" style pulley holder can be used to hold the water pump stationary when removing the viscous fan clutch. The "pin" style wrenches are #99800, #61500 and #63600.

BACK TO TOP