OUR QUALITY SPECIALTY
AUTOMOTIVE HAND TOOLS CAN BE OBTAINED BY ORDERING THROUGH YOUR LOCAL MOBILE
TOOL TRUCK DEALER
UNIVERSAL LONG REACH SPARK
PLUG BOOT PULLER
#65350
Patent Pending
· Long reach to grab down to the
bottom of the spark plug boot.
· Tips have a gripping ledge to
go under the spark plug boot.
· Tips have a vertical ribs to
grip the spark plug boot to help break it loose.
· Swivel design for any angle of
approach which allows the use of a lever block to pop the spark plug boot
off.
· This tool works on all types
of vehicles.
TOYOTA & LEXUS FRONT
AXLE LOCK NUT REMOVER KIT
#65400 Patent Pending
· Axle nut lock ring release tool for the 30 mm
axle nut found on many Toyota & Lexus vehicles to easily unlock the
30 mm axle nut.
· Failing to unlock the detent portion of the axle
nut prior to removing the nut often results in damaging the axle beyond
repair.
· This tool combines a 30 mm, 12 point special
depth 1/2 inch drive socket.
Toyota:
Avalon 2002 and later, Camry 2002 and later, Corolla 2003
and later, Prius 2001 and later, Sienna 2002 and later, Solara 2004 and
later
Lexus:
ES300 2002-2003, ES330 2004 and later, RX300 1999-2003,
RX330 2004 and later
HONDA & ACRUA TRAILING
ARM BUSHING X-TRACTORTM
#65100 Patent Pending
·Easily and quickly remove and install trailing
arm bushings in 15 minutes per side versus the factory "book"
time of 1.8 hours per side.
·No removing the trailing arm from the vehicle
and using a hydraulic press.
·No need to disconnect brake parts such as calipers,
rotors, brake shoes, brake fluid lines and emergency brake cables.
Works on:
Honda; Civic 1988-2000, CRX 1988-1991, Del
Sol 1993-1997
Acura; Integra 1994-2001
UNIVERSAL G.M. - CHRYSLER
- MITSUBISHI
HARMONIC DAMPER PULLEY PULLER
#64900 Patent
Pending
Use on Automobiles, Pickups, SUV's
& Vans
This tool was RE-ENGINEERED from our #97400 series to fit
the following additional GM applications:
4.2L Straight 6 cyl. in Trailblazer, Envoy & Bravada
all 2003 and later also Rainier 2004 and later.
3.5L Straight 5 cyl. in Colorado & Canyon 2004 and
later also Hummer H3 2006 and later.
2.8L Straight 4 cyl. in Colorado & Canyon 2005 and
later
The #64900 also fits the original #97400B Applications
UPDATE KIT
Patent Pending
UNIVERSAL G.M. - CHRYSLER
- MITSUBISHI
HARMONIC DAMPER PULLEY PULLER
#64910 Update Kit
Update any version of our original #97400 series or other
brands similar to our #97400
to the new applicaions of the #64900.
LEXUS & TOYOTA HARMONIC
DAMPER PULLEY HOLDING TOOL
Lexus 1990 and later: 3.0L
L6, 3.0L V6, 4.0L V8, 4.7L V8
Toyota 1996 and later: 3.3L
V6, 4.0L V6, 4.7L V8
#64300
Allows the technician to
hold the pulley stationary for center bolt removal and installation.
240 ft lb tightening spec
for center bolt makes this tool essential for pulley removal and installation.
(Refer to factory specs for
proper bolt installation and torque setting).
Patent Pending
VARIABLE ANGLE VALVE STEM
SEAL PLIERS
#62900 Patent Pending
These unique pliers were
designed to enable the professional technician to reach for and remove valve
stem seals that are inaccessible to standard valve stem seal pliers. The
plier tips can be rotated a complete 180° around the plier handles and
are of a narrow access design for even the smallest of valve stem seals
found in multi valve engines.
HONDA / ACURA SHIFT LINKAGE
PIN R&R TOOL
#64550
This tool allows the technician
to accurately remove and install the shift linkage pin on vehicles using
shift rod linkage. The tool includes a "guide step" on one end
and knurled handle for a positive grip for precision removal and installation
off the shift linkage pin.
MOTORCYCLE AXLE WRENCH
19 mm & 24 mm sizes
This tool works on most Suzuki,
Honda, Yamaha and Kawasaki motorcycles.
#63850
This tool is used to install
and remove front wheel axles and swing arm pivot shafts. It is a double
sided wrench which has both a 19 mm and 24 mm hex. There is also a 3/8"
square drive hole in the handle to provide easy torque adjustment.
NEW! FAN CLUTCH WRENCH COMBINATIONS QUICK REFERENCE
FAN CLUTCH WRENCH DISPLAY SETS
These wrench sets were designed to display
and store SP TOOLS fan clutch wrenches. The display rack can hold up to
seven different variations of wrenches. Included with the display is a Quick
Reference Guide. The Quick Reference Guide is an easy source to identify
which wrenches are needed to service many different viscous fan clutches
that are installed on many Chryslers, Ford's, GM's, BMW's, Audi's, Land
Rover's and Mazda's
THERE ARE TWO DIFFERENT DISPLAY
/ STORAGE SETS AVAILABLE
#62100 AUDI, BMW & VW FAN CLUTCH WRENCH
#61600 UNIVERSAL FAN CLUTCH WATER PUMP PULLEY HOLDING TOOL PATENT PENDING
#61500 G.M. DIESEL WATER PUMP / FAN CLUTCH
PULLEY HOLDER
#99800
G.M. & CHRYSLER WATER
PUMP / FAN CLUTCH PULLEY HOLDER
#61800 48 mm HEAVY DUTY FAN CLUTCH
WRENCH
OUR QUALITY SPECIALTY AUTOMOTIVE HAND TOOLS CAN BE OBTAINED BY ORDERING
THROUGH YOUR LOCAL MOBILE TOOL TRUCK DEALER
#62020 TWO WRENCH
SET click here
for more information
#62050
FIVE WRENCH SET click
here for more information